Crestron pyng sonos

Crestron pyng sonos

A cost-effective, single-gang in-wall lighting dimmer for Volt applications. Features reverse phase dimming technology for use with dimmable electronic low-voltage, LED, incandescent, and 2-wire fluorescent lighting loads.

Fully-configurable, field-replaceable engravable buttons enable personalized control with onboard presets and customizable functionality. Available in smooth white, almond, and black. Its buttons are configurable, engravable, and field-replaceable to allow for a variety of layouts and custom functionality. A choice of white, almond, and black smooth finishes is offered. It is also capable of controlling incandescent, tungsten-halogen, dimmable screw-base type CFL and LED bulbs, and 2-wire dimmable fluorescent ballasts.

Customizable Buttons Each Cameo Express dimmer features the ability to configure its buttons in a variety of layouts to adapt its functionality to the application. More sophisticated functionality is afforded using up to four buttons, allowing up to three dimming presets to be stored and recalled at will.

Through integration with a control system, buttons may even be assigned to control a second lighting zone, select a whole-room lighting scene composed of several dimmers, turn on a ceiling fan, or adjust the audio system volume. Button caps may also be ordered with custom engraving [3]allowing each button to be labeled according to its function. The buttons are field configurable and replaceable, allowing changes to be made at any time.

Green LED indicators are included to provide feedback when a button is pressed or a preset is selected. They also function as a bargraph to display the dimming level as the dimmer is adjusted. When the load is turned off, the top LED glows dimly, allowing the dimmer to be located easily in a dark room.

It can also enable intelligent automation as part of a complete Crestron energy management solution. Ultra-reliable infiNET EX wireless technology provides steadfast two-way RF communications throughout a residential or commercial structure without the need for physical control wiring.

Employing a 2. Up to infiNET EX devices may coexist on a single wireless network, and every device that is added to the network effectively increases the range and stability of the entire network by providing multiple redundant signal paths.

This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.

Intersection of lines and curves worksheet

The specific patents that cover Crestron products are listed online at: patents. Certain Crestron products contain open source software. For specific information, visit www. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.

Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. Online Help.

crestron pyng sonos

Add to Favorites. Have a question?Find remotes at:. Universal Remote Control Inc. Digital R Forum Search. View Profile. Anyone know when Crestron will have the Sonos integration available for the Pyng System? I know the latest x60 touch panels are now compatible with Pyng, just wondering when they will add the Sonos integration. The 50 series have been Pyng compatible for some time now. Haven't heard when release will be for the Sonos module for Pyng.

On February 22, atkgossen said FYI, Pyng has advantages, but also many limitations hence this thread. If the system hasn't been completed, or started, it may be worthwhile to explore having it programmed conventionally, i.

The difference in cost might not be significant, especially when the benefits are considered. On February 26, atTony Golden said Before you can reply to a message You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. Register for an account. Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum.

For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate. The following page was printed from RemoteCentral. Sonos, Pyng Integration This thread has 5 replies.Quickly and easily configures and controls whole-home audio systems, lighting, shades, thermostats, door locks, and security systems. Check out what Pyng can do for you at crestron.

A Crestron touch screen [1] that is connected to the Pyng system automatically adds the entire system, providing instant connectivity and control. Use the app to listen to music in any room or share audio sources throughout rooms for party mode and trigger environmental scenes within the Pyng network.

Let the Pyng app turn up or down the lights, set the thermostat to an ideal temperature, and tune in the audio system to your favorite streaming service, all at the touch of a button. Then program the rest of the devices in the system for a truly custom experience that can be easily adjusted by the homeowner. Audio streaming sources, [2] amplifiers, [3] and touch screens [1] are wired devices that automatically display as available in the app when they are connected to the network.

Add speakers to up to 72 independent rooms and even bridge speakers for rooms that need more power. Add up to 20 touch screens to a single system.

Once connected, the Pyng user interface will populate with the connected devices instantly. Use quick onscreen setup menus to set default rooms and available rooms. Streaming Music Crestron Pyng pairs with a diverse selection of devices to bring a variety of music streaming services to any room in a home.

Audiophiles can rejoice in the variety of streaming music services and ease with which whole-home audio is set up with Crestron Pyng. The Pyng SmartObject can be pulled into any Crestron project, where it is instantly reskinned to match the custom user experience design.

These steps include effortlessly choosing and naming rooms, adding accessories, creating scenes, and scheduling events. After the Pyng network is set up, homeowners can perform basic configuration functions such as creating scenes and scheduling events without the help of an integrator. Open the app on an iPad and then configure the Pyng network by following these simple steps:.

Sonos and Crestron Media Player

It has connections for a dedicated power supply and Ethernet with PoE. In addition to cloud backup, settings are stored in the hub. Up to four external gateways can be added, each of which supports 50 accessories, for a total of infiNET EX accessories that work together on a Pyng network. The user interface displays and directly controls all of the preset scenes, a list of rooms, and all of the connected accessories throughout the home. Other Crestron products must be purchased from an authorized Crestron dealer.

To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www. The specific patents that cover Crestron products are listed online at: patents.Provides the hardware interface between the Crestron Pyng App and all the devices in the system.

Learn more about what Crestron products work with OS 1click here. Want to upgrade and utilize Crestron Home? Learn more here and the CP4-R product page.

System setup and configuration is accomplished by a Crestron authorized installer using the Crestron Pyng App. Configuration settings are stored onboard the control hub and backed up in the cloud to ensure reliable operation and easy serviceability.

This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.

The specific patents that cover Crestron products are listed online at: patents. Certain Crestron products contain open source software. For specific information, visit www. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others.

Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. Online Help. Add to Favorites. Have a question? Add to a Project. Find a Dealer. Overview Specifications Resources Models. Item s sold separately. The total range of an infiNET EX wireless network is dependent on the placement and capabilities of each network device. This effectively extends the total range of the network and provides multiple redundant signal paths for extra reliability.

Please note that battery-powered infiNET EX devices only operate as leaf nodes and do not provide expander functionality. Use care when positioning the device to avoid interference from nearby RF devices, obstructions, and metal surfaces. Note: Do not rackmount or stack multiple units when using wireless.

crestron pyng sonos

IEEE Input: 0.Version 1. Crestron installers can integrate Amazon Alexa software with home systems without any programming. Integrating Sonos with Crestron Pyng as a multi-room audio source has been made easier. Simply pair Crestron Pyng with Sonos Connects and you can immediately select and control Sonos favourites with gorgeous Crestron touch screens, including the elegant new TSWP 5" portrait model.

CTPs can also pre-configure customer rooms, lighting loads, and modules off-site and then retrieve them from the cloud on-site. No more double work planning and documenting systems for electricians and then having to recreate that entire process in the Crestron Pyng app while on-site. Projects can be documented and configured remotely in just one step.

Combining the all-new residential version of Crestron Studio software with Crestron Pyng enables CTPs to configure custom AV controls for Crestron touch screens, handheld remotes, and keypads with a whole new level of efficiency.

Geny Caloisi is an accomplished technology journalist who has worked in a variety of AV industry publications. Please Login if your an existing member or Register a new account.

Will these new models sound any better than current models? Steve May. Have found analogue outs give excellent High End sound for CD ,but can not be used as there is no Search InsideCI Geny Caloisi Geny Caloisi is an accomplished technology journalist who has worked in a variety of AV industry publications.

Share this! Sorry guests can't post comments. Steve May Contributing Editor. Geny Caloisi Freelance Journalist.

Bmw e30 differential backlash

Leema Acoustics to hand-build Hi-Fi to order and ship direct 10 Apr Join Us. Facebook Pages.Update your browser to view this website correctly. Update my browser now. I viewed it as not only a great way to get systems up and running, but a prelude to being able to bring mid-market clients into the Crestron ecosystem. A moderately trained tech can do the system commissioning and configuring Pyng is not programming.

A few years ago, Crestron added audio to the Pyng hub with control for Sonos and Crestron audio matrix amps. This allowed clients to experience the next level of smart home technology by integrating environmental control with audio control. Starting with Pyng inI had some success getting clients hooked on smart home technology at a reasonable programming price point and have, over time, grown the majority of those systems into full-blown Crestron implementations with AV control and more advanced programming, but still maintain the Pyng ecosystem in the background.

Adding in audio made it even more attractive to clients and made the upgrade path to audio control and distribution clearer, more enticing, and smoother. Sonos integration has been a big hit with Crestron dealers since it launched and, with integration in Pyng, Crestron is seeing Sonos as a source on almost every distributed audio project, from Connects to Amps to Play speakers.

The Power of Pyng Pyng has changed my business. Customers are happier. The power of Pyng is in their hands. If they want to make a change to a scene or a favorite TV channel, they can do it on their iPad, on the fly.

Plus, we are more efficient. Now customers can do it themselves. No more compiling and uploading huge programming files and waiting 10 to 20 minutes to test every change and tweak — everything we do is live as soon as we do it in the Pyng app, and we can do it anywhere we have internet access.

Crestron Pyng Adds Native Support for Sonos and Amazon Alexa

Our techs are happier because they are doing more value-added work than just terminating wires and connecting equipment. They can now commission an entire system themselves, without a programmer.

Dealers using Pyng have been waiting for this for a while — AV control. Now a video system can be easily configured from within the Pyng interface. The Pyng processor is the CP3-R, and it includes everything you need to get anything from a single room to a full distribution system up and running.

So you not only get the ease of Pyng, but you still get the great reliability, support, and backing of Crestron and the quality of their hardware. Once the AV equipment is physically connected and all cabling is run, it takes less than an hour to get a full distributed audio system configured in Pyng. I could probably do it in 10 minutes for a single-room solution.

crestron pyng sonos

All you do is use the the Pyng iPad App and enter the system setup:. All touch panels, mobile apps, and TSR touchscreen remotes are auto configured. For HR remotes, like the HR, just go to the Customize screen, name the device button, and assign a device to that button.

Pyng OS 2 will auto configure all necessary programming and macros to turn on devices, select inputs, and route audio and video signals — all without downloading or compiling a file.

Bjw schedule

It happens live on the Pyng CP3-R and is live as soon as you tap. Another benefit is that the configuration is available to anyone connected to the system, so there is no worry that a tech on-site adding a device down the road will have an outdated programming file or will not be able to access the configuration. It is all right there, natively on the Pyng processor, plus it is backed up automatically to mycrestron. Driver search is really easy, because the database is clean. Instead of populating the database with 25 new Sony TV drivers every year five models x five sizesthere is one driver for the past several years that covers all Sony TVs made in that time.

The Evolution of Pyng

Multiply that by all of the display and Blu-ray manufacturers, and you can see how much cleaner and streamlined the database will be. Or, even better, just use CEC control, since it is a standard across the industry.

There is one driver that covers all devices of that type with CEC control. No models to check, no compatibility issues. To steal a line from Steve Jobs, it just works. Playing Favorites Does your client have favorite channels that they watch? To incorporate favorite channels, once a provider is selected for a cable box, favorite channels can be populated into Pyng.Update your browser to view this website correctly.

Update my browser now. A new Crestron Pyng software update Version 1. Integrating Sonos with Crestron Pyng as a multi-room audio source is now effortless, according to Crestron. All that is required is to follow simple configuration steps. CTPs can now pre-configure customer rooms, lighting loads, and modules off-site and then retrieve them from the cloud on site.

Siberian cms review

No more double work is required for planning and documenting systems for electricians and then having to recreate that entire process in the Crestron Pyng app while on-site.

Now, you can document and configure remotely in just one step. Clients can now easily create their own scenes and schedules for lighting and shades through user interfaces other than Crestron Pyng, such as mobile projects and touch screens generated by the residential version of Crestron Studio software. Combining the all-new residential version of Crestron Studio software with Crestron Pyng enables CTPs to configure custom AV controls for Crestron touchscreens, handheld remotes, and keypads with a whole new level of efficiency.

Your browser is out-of-date!